Konfigurasi 2 Router Menggunakan Cisco Paket Tracer

ifan.ar --- hay sobat kali postingan kali ini saya akan membahas tentang konfigurasi 2 router di cisco paket tracer. jangan terlalu lama - lama mari kita mulai praktiknya .. selamat menyimak

1. Sobat buka dulu Cisco Paket Tracer

2. Sobat buat Topologi seperti gambar di bawah ini.
    disini saya membuat 2 pc dan 2 router
    masing - masing alamat ip.nya
    PC 0 = 192.168.10.1 / 24
    PC 1 = 192.168.20.1 / 234
    ROUTER 0 = 192.168.30.1 / 24
    ROUTER 1 = 192.168.30.2 / 24

3. Sobat kasih Ip terlebih dahulu PC 0.

4. Kemudian Sobat juga kasih Ip di PC 1.

5. Kemudian Kita klik Router 0 -- pilih CLI, tahap ini sobat akan mulai konfigurasi.

Router 0

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.10.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int fa0/1

Router(config-if)#ip add 192.168.30.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2

Router(config)#

 

6. Selanjutnya sobat klik Router 1 --- pilih CLI, tahap ini seperti di atas.

Router 1

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/1

Router(config-if)#ip add 192.168.20.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.30.2 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.30.1

Router(config)#

7. Setelah proses Konfigurasi selesai sobat Ping terlebih dahulu apa PC ke PC sudah connec apa belom.

8. Kalo sudah successfull berarti sobat berhasil.

SELAMAT MENCOBA SOBAT....

Posted in: Cisco